How To Remove Gel Polish
Got a question?
Find all the answers in our FAQs
How do I apply LMM gel polish?
If you are a new user of gel polish, please give yourself 2-3 manicures (tries) to get used to how to apply gel polish.
There are many tips and tricks to applying gel polish that make the difference between a good application and an application that is too thick or doesn’t last long enough (i.e. chips easily). Often, new users of gel polish make small mistakes during the application process and then think that any chipping is due to the formula of the gel.
We have tested our gel polish countless times and it truly is an amazing 1-step formula. You won’t find a better 1-step formula on the market (really!)…so please be patient, read our application instructions carefully, and take your time to familiarize yourself with LMM gel!
Once you get used to the application process, you will find that this is a fantastic gel that will give you a shiny, colorful, and chip-free manicure for work, play, and travel!
- When you start your nail prep, you just need to push your cuticules back (we include a cuticle pusher in our kits). Trim loose skin or snags (with a cuticule nipper). This is an optional step; you don’t really need to do it as longs as you use cuticule oil and hand cream regularly and push them back sometimes. This keeps them groomed on an ongoing basis.
- File the edge and the surface of each nail. Filing the surface allows the gel to adhere better and filing the edges helps keep the gel from chipping. File in one direction using light strokes. You don’t want to saw away (back and forth) at the edge of your nail as this wear it down quickly and it’s easy to get an uneven shape.
- Make sure the first coat of gel polish is VERY thin (with barely any gel in the brush). Do NOT lob on a bunch of polish the way you would do with regular nail polish. This is EXTREMELY IMPORTANT to ensure that the base layer is not too thick, which will affect the lasting. You can remove excess gel polish from the brush (before applying) by wiping it along the opening of the bottle. This will help in ensuring a VERY thin first layer.
- If you get it on your skin, use the cuticle stick or your thumb nail from the other hand, to just remove the excess before curing the nail with LED Lamp.
- If you smear it BEFORE you go into the lamp to dry it, you just need to wipe off the entire nail with the remover + a cotton pad and re-paint it.
- Cure the nail as soon as the gel is applied (instead of applying gel on all five fingers then curing one by one). It’s important to cure each nail immediately to minimize the amount of time the gel is exposed to air, as this will negatively affect the result. The mini macaron is a 30 sec cycle, and the maxi macaron (larger lamp) is a 60 sec cycle.
- Apply a second layer of gel polish and cure again. Make the 2nd coat slightly thicker with even strokes of gel polish. This will create a nice, smooth top layer, which can last longer.
- Cap the tip of every nail by running the brush along the edge. This will also protect from chipping by providing a thicker layer of gel along the nail edge.
- Let the lamp rest for 30-60 seconds between application on your left and right hands. This will allow the lamp to cool down.
- Close the bottle of gel polish when not in use, and while you are waiting for each curing cycle if possible (or at least set the cap over the bottle while you are curing to minimize the amount of air and light that enters the bottle). This will prevent the gel from drying out, as gel reacts to both LED light and also natural light. Avoid having the LED lamp shine directly on an open bottle of gel, as this will also dry out the gel.
- Be sure to shake the bottle well each time before applying because our gel polish is a 3-in-1 gel (base coat, color and Top coat all in one formula). Sometimes if the bottle has been sitting for a long time, the Top coat component can separate, so shake well to mix the formula.
- For new users, when you’re drying the nail under the LED light, it’s possible to accidentally move the nail (if you’re not paying attention). It’s important to keep the finger still so that the light dries all around the entire surface (including the edges of your nail). You can always cure your nail for an additional 5-10 seconds to ensure that you have completely dried the nail before moving on to the next one. This will make sure that even the edges are fully cured. If you are still experiencing chipping issues, we recommend curing for an extra 5-10 seconds to make sure that the chipping is not caused by nails which aren’t fully dry.
- Don't apply hand lotion or cuticle oil BEFORE or DURING the gel application process. This will cause the gel to slip and not adhere well.
- Don't buff your nails after filing them . Filing creates a rough surface, allowing the gel to adhere better. Buffing reverses this effect by making the surface smooth again (which will cause the result not to last very long).
- Don't apply the gel on or too close to the skin . If you get gel on your skin, use the cuticle stick to remove it before curing. Curing gel on your skin will affect the lasting (easier to the gel to come off).
- Dont apply gel polish in direct sunlight (outdoors or in a sunny room) as this can cause the gel to harden (as this is what happens with LED light). Work in a cool, dark space with interior light. (The same goes for storage of your gel polishes).
How do I remove LMM gel polish?
Gel Polish is different from regular nail polish in that you need to “soak” it off.
Le Mini Macaron has a variety of products to facilitate the elimination of the gel or any kind of nail polish from your nails.
To remover your old manicure:
- File the surface of the gel manicure that you wish to remove. This step will eliminate the top layer of the gel polish (which is the hardest one) and will allow the remover pad to work even better. For a gentler filing, we suggest you to try our Sanding Block. Make sure NOT to file the gel until you see your natural nail, only file slightly the upper coat.
- Tear open the Remover Pad and insert your finger, with the cotton pad over the nail. The acetone from the cotton pad will soak into the gel.
- Wrap the packet around your finger, removing the sticker on the packet to ensure that it’s air tight. For better results, insert each finger with its correspondent pad into our Remover Clips. Wait 15 minuttes.
- Remove the packet. The gel polish will have a shattered effect. Use our Gel Polish Remover Tool or the cuticle stick that comes on each LMM Kit to scrape off the gel.
- Wash your hands to remove any debris. If your cuticles are dry use a little bit of hand cream to moisturize them.
- Last but not least, if you want to revitalize and and give your nails a break from any kind of polish, our nail treatment Rescue Moi, with Vitamin B5 and C, will help to re-build, restore and rejuvenate the surface of your nails in just one week.
I followed all the instructions but my gel polish is still chipping after 2-3 days! What do I do?
If you have followed all the basic tips on the application do’s, and you are still face chipping issues, it may be because of the natural oils in your nails. In fact, 20% of women have naturally oilier nails just due to body chemistry.
We recommend that you wipe your nails before you apply gel polish. You can use regular nail polish remover to quickly wipe each nail after filing the surface. This will remove the dust from filing and create a non-oily surface to start your application.