Get Salon-Quality Results with Our Gel Manicure Kits:

• As you begin your nail preparation, gently push back your cuticles using the cuticle pusher in our kits. If there are any loose skin or snags, you may trim them with the cuticle nipper. However, this step is optional. Regular use of cuticle oil and hand cream, combined with occasional pushing back of the cuticles, will keep them well-groomed.

• File the edge and the surface of each nail. Filing the surface allows the gel to adhere better and filing the edges helps keep the gel from chipping. File in one direction using light strokes. You don’t want to file nail in a back-and-forth motion as this wears it down quickly and it’s easy to get an uneven shape.

• Make sure the first coat of gel polish is VERY thin (with barely any gel in the brush). Do NOT lob on a bunch of polish the way you would do with regular nail polish. This is EXTREMELY IMPORTANT to ensure that the base layer is not too thick, which will affect the gel's lasting power. You can remove excess gel polish from the brush (before applying) by wiping it along the opening of the bottle. This will help in ensuring a VERY thin first layer.

• If you get it on your skin, use the cuticle stick or your thumbnail on the other hand to remove the excess before curing the nail with LED Lamp.

• If you smear it BEFORE you cure it in the lamp, wipe off the entire nail with the  remover + a cotton pad and repaint it.

• Cure the nail as soon as the gel is applied. It’s important to cure each nail immediately to minimize the amount of time the gel is exposed to air, as this will negatively affect the result. The mini LED lamp is a 30-second cycle, and the maxi lamp (larger lamp) is a 60-second cycle.

• Apply a second layer of gel polish and cure again. The 2nd coat should be slightly thicker applied with even strokes of gel polish. This will create a nice, smooth top layer, which can help the polish to last longer.

• Cap the tip of every nail by running the brush along the edge. This will also protect from chipping by providing a thicker layer of gel along the nail edge.

• Let the lamp rest for 30-60 seconds between applications on your left and right hands. This will allow the lamp to cool down.

• Close the bottle of gel polish when not in use, and while you are waiting for each curing cycle. (Or, at least set the cap over the bottle while you are curing to minimize the amount of air and light that enters the bottle). This will prevent the gel from drying out, as gel reacts to both LED light and also natural light. Avoid having the LED lamp shine directly on an open bottle of gel as this will also dry out the gel.

• Shake the bottle well before applying to thoroughly mix the formula. As our gel polish is a 3-in-1 gel (base coat, color, and top coat all in one formula), the top coat can separate, so shake well to mix the formula.

• For new users, when you’re drying the nail under the LED light, it’s possible to accidentally move the nail (if you’re not paying attention). It’s important to keep the finger still so that the light dries all around the entire surface (including the edges of your nail). You can always cure your nail for an additional 5-10 seconds to ensure that you have completely dried the nail before moving on to the next one. This will make sure that even the edges are fully cured. If you have problems with chipping, we recommend curing for an extra 5-10 seconds.

You can contact us through our contact page! We will be happy to assist you.

Our LMM products are safe to use during pregnancy, but we understand that some women like to limit the amount of beauty products that they use (in general) while pregnant. It is up to each woman to decide. If you feel comfortable using regular nail polish products, then you can feel comfortable to use gel products, which contain little to no fumes and no harmful chemicals. Unlike UV lamps (which contain UV light), our LMM lamps use LED light – the same kind of light you get from inside an office building – which is safe to be exposed to on a daily basis.